The WSXD20 is a multi-purpose vehicle that combines the features of a low lift pallet truck and a stacker into one. This characteristic is beneficial in particular in activities such as loading and unloading commercial trucks, quickly transporting pallets, and storing goods at a lift height of up to 3,600 mm.
When using the double-deck function, two euro pallets can be moved simultaneously. This significantly increases the throughput rate compared to traditional low lift pallet trucks and stackers.
LOAD CAPACITY
max. 2000 kg
LIFT HEIGHT
max. 3900 mm
TRAVEL SPEED
max. 6 km/h
ENGINE OUTPUT
1.1 kW
BATTERY
max. 225 Ah/5hr
STACKING WIDTH
min. 2263 mm
- Two loads can be moved simultaneously
due to the double-deck function (2 x 1000 kg) - CLARK Speed Control (CSC)
- Standard lateral battery removal
- Enhanced safety: At a lift height of 500 mm and more, the travel speed is adjusted automatically
- Low lift pallet truck and stacker all in one
- Can be used in double-deck jobs
When using the double-deck function, two euro pallets can be moved simultaneously.
Use as low lift pallet truck
- 2000 kg with support arm lift to a lift height of 210 mm
- 1200 kg up to a lift height of 1600 mm
- 2x 1000 kg when using double-deck function
Use as stacker
- 1000 kg up to a lift height of 3,000 mm
Practical switch function
- In the low lift pallet truck mode, the WSXD20 automatically stops at a lift height of 1600 mm
- When using the vehicle as a stacker, the operator can access higher lift heights by activating a switch function
Ergonomic and safe tiller
- Simple and fast implementation of control commands
- Automated soft deceleration and return into the neutral position when releasing the tiller
Automatic parking brake
- Safe operation on slopes and ramps
- Release of the automatic parking brake when driving switch is activated
- Makes it easier to maneuver, in particular when using the vehicle in smaller spaces
- Depending on the tiller position, the maximum travel speed is adjusted automatically
- In the Speed Control mode (S), the maximum travel speed is controlled; this ensures safe and swift positioning
- If the tiller is in normal drive mode (K), maximum travel speed can be reached
All parameters can be customized as per the customer’s request.
